Pendulum Triptych Ceiling Lamp In Bio Plastic
by Julie Mallet Studio · Marseille, France

65x20x115cm (26x8x45")Bio Plastic

Pendulum Triptych hangs three 3D-printed pendants at different heights, each PLA shade infused with a different recycled residue, scallop shell, mussel shell or coffee grounds. Designed and made in Marseille, the small pendant takes an E14 socket; colours and finishes are customisable. Bulb not included.

Read more
8 others are viewing this
Certificate of authenticityAll pieces on ADORNO are authentic and studio-made. To verify that, a certificate, signed by the maker, is always included in the box.
€792
Shipping to your location
Import duties may applyWe declare all pieces as original duty-free works, however, your local customs office makes the final decision. Learn moreAll taxes includedWhat you see is what you pay. No hidden costs.
-
+
Open Edition
Ongoing series by the maker. Slight variations may apply.
Made for you
You will get pictures of the final piece before shipping
Delivered between25 Oct – 1 Nov
We arrange insured delivery from door to door.
Buyers protection
  • Certificate of Authenticity A signed certificate from the maker is always included in the box.

  • Lowest price guaranteed Find a lower price from the seller, we'll match it.

  • Secure online transactions All personal information that you send to us is encrypted and cannot be viewed by others.

  • 100% insured global deliveries We arrange worldwide delivery, and every shipment no matter the price is fully insured against damages.

  • 14 days return policy In the rare event, you receive a piece that you are not fully satisfied with, you can return it within 14 days of receipt for a full refund except return shipping costs. Made-to-order items are not eligible for return.

Shipping and delivery
Ships fromMarseille, France
Delivery toyour location
Estimated delivery dateOctober 25 - November 1
Cardboard125x50x50cm, 4kg
  • Tracked from studio to doorstepYou receive a tracking link as soon as the piece leaves the studio, and can follow it through every carrier hand-off until it reaches your door.
  • 100% insured, door to doorEvery shipment is fully insured from pickup to delivery. If anything happens in transit, you are covered for the full purchase price.
  • All made to order purchases are finalThis piece is produced specifically for you once you order, so it cannot be returned or exchanged.
  • Duties and taxes may applyWe declare all pieces as original duty-free works, however, your local customs office makes the final decision. Learn more
Specifications
Dimensions LxWxH
Piece Weight (kg)

1.0

Production Year

Material

Discipline

,

Color

, ,

Design Class

FAQ
Does this lamp come with a bulb?

No, the bulb is not included. The fitting takes an E27 bulb, though the smallest of the three pendants is designed for an E14 socket.

Is this lamp dimmable?

Dimmability is not specified in the product data — the maker can confirm, use Chat with the maker on this page.

What plug type does it use, and will it work in my country?

It ships with a Type C/E (EU) plug for 220–240V. Adaptation to other plug types is available upon request.

How long is the cord, and can it be customized?

The cord is 150 cm as standard, and custom cord lengths can be requested.

Is this made to order, and how long will it take?

Yes, this piece is made to order and usually ships within 4 weeks.

Can I choose different colors or finishes?

Yes, colors and finishes can be customized upon request, and each of the three pendants naturally varies slightly since it is part of an open edition.

What is it made from and how should I care for it?

Each pendant is 3D-printed from plant-based PLA infused with a different recycled residue — scallop shell, mussel shell or coffee grounds.

Can I return this piece if I change my mind?

Standard orders can be returned within 14 days, but made-to-order pieces like this one are excluded from returns.

What is a pendant light?

A pendant is a single light fixture suspended from the ceiling on a cord, chain or rod, usually with one shade and one light source. The defining characteristic is that it is designed to be repeated: pendants are commonly hung in twos and threes over a surface, where a chandelier is a single composed fixture intended to work alone.

What is the difference between a pendant light and a chandelier?

Count the fixtures rather than the bulbs. A chandelier is one object with multiple arms, elements or lamps built into it, hung centrally as the focal point. Pendants are individual fixtures, often identical, positioned in a line or a cluster — the composition is created by how you arrange them, not by the piece itself. Pendants are also easier to scale to an awkward room, since you can add, remove or space them as needed.

How high should pendant lights hang above a kitchen island or dining table?

75–90 cm from the surface to the lowest point of the shade in both cases, on a standard 2.4 m ceiling, adding a little for each additional 30 cm of ceiling height. The check differs by position: at an island you are usually standing, so the light source should be hidden from standing eye level and the shade should not block the sightline of anyone seated on the other side. At a table you are seated, so sit down and look across it — you should see the person opposite, not the fixture. Taller households generally want the upper end of the range.

How many pendant lights do I need over an island?

One for an island up to roughly 1.2 m, two up to 2.4 m, three for anything longer. Larger shades mean fewer of them. If you are choosing between two medium pendants and three small ones, the smaller row usually looks more deliberate over a long island, and a single generous piece is often the best answer over a short one.

How far apart should pendant lights be?

Divide the island or table length by the number of pendants plus one, and set the centers at those points — typically 60–80 cm apart. Keep the outer pendants at least 15 cm inside the ends of the surface. Even spacing matters more than any particular figure; an off-center row is the most visible mistake in this category.

What size pendants should I choose for an island?

Keep the total combined width of the pendants to about half or two thirds of the island length. Mini pendants under 30 cm work in rows of three; 30–45 cm is the standard range for a pair. A single pendant over a short island can go considerably larger, since it has nothing to compete with.

Should pendants be centered on the island?

Centered across the width, yes, and spaced evenly along the length. Two complications come up in practice: existing ceiling boxes rarely sit where you want them, and joists limit where a new one can go. Establish the wiring positions before ordering, since a handmade pendant cannot be nudged 20 cm after installation.

Can the cord length be adjusted?

Usually. Most studios supply extra cable that an electrician shortens on site, and many will make a specific drop length to order — useful for stairwells, double-height kitchens and low ceilings alike. Send us the ceiling height and the position you have in mind and we will confirm what the maker can do.

Do you have plug-in pendant lights?

Rarely. Almost everything in this collection is hardwired, since that is how designers intend these pieces to be installed. A plug-in conversion or swag kit fitted by an electrician is sometimes possible, but it changes the look and is not something we can promise for a given piece — ask us before buying if a plug-in solution is your only option.

Can I use a pendant in a bathroom or outdoors?

Not from this collection. Bathroom and exterior positions require rated, sealed fixtures appropriate to the zone, and the requirements differ by country. These are handmade decorative pieces for dry interior use — including in covered porches, where condensation and temperature swings will affect ceramic glazes, paper, fiber and untreated metal.

Can I mix different pendants over the same surface?

Yes, and it often works better than a matched row. The reliable approach is to keep one variable constant — the same maker, the same material or the same silhouette — and vary the rest. Hanging three unrelated pendants together tends to read as indecision rather than curation.

Which pendant materials suit a kitchen?

Glazed ceramic, glass, brass, copper and steel wipe clean and tolerate the heat and humidity of a working kitchen. Woven natural fibre, paper and textile shades are beautiful over a dining table but absorb cooking grease, so avoid hanging them directly above a hob. Ask us for the maker's cleaning guidance for any specific piece.

Description

Pendulum takes its name from the weighted pendulums traditionally used in dowsing and divination, and builds a lighting composition around the same concerns: balance, tension and movement. Three complementary volumes hang at different heights and proportions, forming a rhythmic arrangement that holds a subtle dialogue with the surrounding architecture. Change your viewing angle and the three suspended forms appear to move closer together, drift apart or overlap, creating an ever-changing graphic presence.

When illuminated, the soft light emphasises the lines and volumes of each pendant; switched off, the composition keeps its sculptural character, continuing to inhabit the space through its quiet presence.

Each pendant is 3D-printed in Marseille from plant-based PLA infused with recycled natural residues, and the three finishes each carry a different residue: off-white (recycled scallop shells), beige (recycled mussel shells) and brown (recycled coffee grounds). Subtle variations in colour, texture and translucency mean every composition responds differently to the surrounding light, making each piece unique.

Colours and finishes can be customised. The small pendant is fitted with an E14 socket. Bulb not included.

Dimensions LxWxH
Piece Weight (kg)

1.0

Production Year

Material

Discipline

,

Color

, ,

Design Class

About Julie Mallet Studio Visit Showroom →

Julie Mallet is a French designer and maker based in Marseille, where she develops a practice at the intersection of sculptural object design, contemporary craftsmanship, and digital fabrication. Formerly trained as an interior architect, she brings a sensitive understanding of space, volume, and light into the creation of sculptural lighting and functional objects. Her work stands apart through a desire to move away from the technological aesthetic often associated with 3D printing, favoring instead organic, textured, and timeless forms. Through a process that combines innovation with craftsmanship, she develops small-batch pieces while maintaining direct control over every stage of production, from the initial sketch to the final prototype. Material research plays a central role in her practice. Julie Mallet primarily works with bioplastic PLA derived from corn starch and enriched with recycled residues such as mussel and scallop shells, as well as coffee grounds. Her approach to materials and fabrication reflects a broader interest in creating a more local, sustainable, and emotionally driven design language. Inspired by her Mediterranean environment, personal memories, and everyday experiences, she creates sculptural objects designed to convey an atmosphere as much as a function.
Question for the maker?
Julie Mallet Studio
Photo Julie Mallet Studio
· Marseille, France
We are here to make sure you get the answers you need - in time.
Member since 2026 · Expect a reply within 24 hoursReply in 24 hours