Citadel Table Lamp in 3D printed PLA
by Ultramar Studio · Madrid, Spain

Yes, it comes with a round LED strip bulb, 12W and 2700K warm white, already fitted.

Yes, it has an on-lamp switch with a built-in dimmer.

It ships with a Type C/E (EU) plug wired for 220-240V, and the maker states it is not adapted for other voltages or plug types.

The standard cord is 200 cm, but custom cord length can be requested — use Chat with the maker on this page.

This lamp is made to order, and made-to-order pieces are excluded from the 14-day return policy.

Yes, customization is available upon request — reach out via Chat with the maker to discuss options.

It is made of 3D printed PLA in translucent white; specific care instructions aren't listed, so ask the maker directly.

Yes, it's part of a limited edition of 20 pieces, and each order includes a certificate of authenticity.

A floor lamp is a freestanding light that rests on the floor, tall enough to light a room or a seating area from above surface level. Unlike a table lamp it needs no furniture to stand on, and unlike a ceiling fixture it needs no installation — which makes it the easiest way to add a permanent light source to a room you cannot rewire.

Between 150 and 180 cm for most positions. The number matters less than the shade height: seated beside the lamp, the bottom edge of the shade should fall at or just below your eye level, roughly 100–130 cm from the floor, so the bulb stays hidden. Uplights and torchieres can be taller because they throw light upward, away from your eyeline.

Three positions do most of the work: in a corner, where an uplight lifts the darkest part of the room; beside or slightly behind a chair, for reading; and behind or over the sofa, where an arc lamp substitutes for a ceiling fixture. Avoid placing one directly in a walkway or where its cable crosses a route people take.

An arc or arched lamp has a long curved arm that extends the light source away from the base, so it can hang over a sofa, a coffee table or a chair without anything mounted overhead. It is the standard solution in rented flats and rooms with no central fixture. Check two things before buying: how far the arm reaches, and how heavy the counterweighted base is.

A torchiere directs light upward into the ceiling rather than down into the room. The ceiling reflects it back as soft, even, glare-free light, which makes a low or dark room feel considerably larger. It works best against pale matte ceilings; dark or heavily textured surfaces absorb much of the effect.

ne with directed light and an adjustable or downward-facing shade — a swing-arm or tripod lamp rather than an uplight. Aim for 400–800 lumens landing on the page, position the lamp slightly behind and to the side of your shoulder, and choose a shade deep or opaque enough that you never see the bulb from your reading position.

Yes — there is a dedicated selection of lamp-and-table pieces, and it is one of the more interesting corners of the catalogue. These are not the shelf-tower lamps sold by furniture chains but single designed objects in which the light and the surface are one thing: illuminated side and coffee tables, lamps whose base doubles as a tabletop, and sculptural pieces that read as furniture with a light source built into them. They are made in ash and plywood, steel, brass, stoneware, marble and natural fiber, and several are held in stock rather than made to order. They earn their place beside a sofa or an armchair where there is only floor space for one object instead of two.

It depends entirely on the piece. Where a lamp uses a conventional frame and a standard fitting, a shade can usually be swapped. Many pieces here, though, are designed as a single form — a blown glass diffuser, a paper shade sized to its frame, a ceramic body — where the shade is the lamp and is not intended to be changed. Product pages describe the construction; ask us if you need certainty.

Stability comes from base weight and footprint, both listed on product pages. Tall slim lamps and long arc arms need a substantial counterweight, and a heavy handmade lamp is not a piece you want knocked over. In a home with small children or large dogs, favor a low center of gravity, a wide base, and a position out of traffic routes — and route the cable along a wall rather than across a floor.

Brass, steel and aluminum for slim arms and arcs that need structural strength; solid wood for tripods and columns with visible joinery; ceramic, stone and concrete for weight and a low center of gravity; woven rattan and natural fiber for texture and broad, dappled light; handmade and rice paper for the soft, screen-like glow associated with Japanese lighting. All of them show wear as patina rather than damage.