-

Rotonda Table Lamp in Resin
By Adrian Cruz
€2.380 -

The Mesia Table Lamp In Ceramics And Glass
By Luis Gimeno Design
€1.600 -

Ne600/145 Table Lamp In Brass And Blue Acrylic
By MLK Furniture
€1.190 -

Verve Green Table Lamp in Bio-based Resin
By Justyna Poplawska
€1.900 -

Basalte Table Lamp In Glazed Lava Stone
By Clemence Birot
€3.370 -

Rio (s) Table Lamp In Green Rainforest Marble
By Harshita Jhamtani Designs
€360 -

Cornice Supreme No. 2 Table Lamp in Polyurethane
By Teresa Fernández-Pello
€1.986 -

Rio (l) Table Lamp In Green Rainforest Marble
By Harshita Jhamtani Designs
€1.160 -

Rio (m) Table Lamp In Green Rainforest Marble
By Harshita Jhamtani Designs
€690 -
SoldChimney Table Lamp In Aluminum And Steel
By BOTHI
€210 -
In stockDervish Table Lamp in Marble and Brass
By Boo Design Studio
€475 -

Chimney Table Lamp In Aluminum
By BOTHI
€210 -
SoldIrony Of Material 01 Table Lamp in Copper
By Studio Speculo
€716
Green table lamps carry their color in the material itself, not just on the surface: green onyx veined with white, patinated brass gone verdigris, glass tinted at the melt, ceramic glazed in a single deep tone. Independent studios build them through stone carving, metalwork, glassblowing, hand-building and resin casting, and most runs stay small, open editions here and limited editions there. The result is a lamp that reads as an object first and a light source second.
What makes green read differently across materials
Green onyx and marble carry the color inside the stone, so no two slabs match and the veining shifts the tone from mineral gray-green to something closer to jade. Painted steel and aluminum hold a flat, consistent green that works as a graphic block in a room. Hand-blown glass behaves like colored light: it glows green when lit and reads as solid glass when off. Glazed ceramic sits between the two, often slightly uneven where the glaze pools thicker in the folds of the form.
The range of materials and techniques behind these pieces
Beyond green onyx and marble, the color turns up in electroplated metal, resin-cast bases and brass or copper finished to a soft patina. Styles span minimalist and Japandi forms with little ornament through to Art Deco and neo-industrial lamps built from visible joints and hardware, with eclectic and boho chic pieces mixing materials inside one base. Some studios work in open editions that stay in production, others cast or carve in limited runs, so a piece in green onyx or hand-blown glass may not repeat once it sells. For a wider view across finishes and forms, the full range of table lamps on ADORNO sits one level up from the color.
How to choose a green table lamp
Scale first: a lamp on a console or sideboard can run taller and heavier than one meant for a nightstand, where the base should sit low enough that the shade does not crowd the eye line when seated or lying down. Stone bases carry real weight, so check the surface can take it; metal and resin lamps are lighter and easier to move between rooms. Finish matters as much as form here, since a polished onyx base catches light differently than a matte-painted steel one, and both will dominate a small side table more than a large one. Think about placement before committing to a strong green: one lamp can anchor a room, but two in the same finish will double the effect rather than balance it.
Where green table lamps work
- Living rooms, where a stone or glass base on a side table or console holds its own against upholstery and rugs
- Bedrooms, where a smaller painted-steel or ceramic lamp gives low, warm light without competing with other colors in the room
- Studies and reading corners, where a taller metal or marble base suits a desk or shelf edge
For rooms built around seating, the living room table lamps make a useful starting point, and the bedroom table lamps cover smaller-scale options for nightstands.
Caring for stone, metal and glass bases
Marble and onyx are porous and will stain if liquid sits on the surface, so wipe spills quickly and avoid setting damp glasses directly on a stone base. Brass and copper will darken and shift tone over years unless sealed, which some owners prefer as part of how the piece ages. Painted steel and aluminum need only a dry cloth, while glazed ceramic and glass can take a damp wipe without any risk to the finish. None of these materials need more than this to hold their color over time.
To see green worked into other forms beyond lighting, the green pieces across ADORNO extend into seating, objects and tables in the same palette.
How do I choose a green table lamp?
Start with how the green is made: stone carries it inside the material, metal holds a flat tone, and glass changes color when lit. Match that behavior to the room and the light already there.
How do I care for a green table lamp?
Dust stone and metal with a soft dry cloth, keep onyx and marble away from oils and damp surfaces, and clean glass with a lint-free cloth. Avoid harsh chemicals on patinated or glazed finishes.
What size table lamp should I choose?
Most table lamps sit between 18 and 30 inches tall, low enough to clear sightlines on a side table and tall enough to clear a desk or console. Check the piece's page for exact dimensions.
Which rooms suit a green table lamp?
Green reads well anywhere light meets a quiet surface: a living room console, a bedroom nightstand or a study desk. Stone and metal versions add weight, glass versions add glow.
Are these green table lamps handmade or produced in limited runs?
Many are, depending on the technique: stone-carved, hand-blown and hand-built pieces often come in open or limited editions. The maker can confirm production details through Chat with the maker on the piece's page.
What about shipping, returns and authenticity when I buy from ADORNO?
Shipping is insured and worldwide, with a 14-day return policy excluding made-to-order pieces. Every lamp arrives with a certificate of authenticity, backed by a lowest-price guarantee.












