-
In stockObject 09 Sconce in Nylon and Sand
By Hot Wire Extensions
€1.145 - €1.163 -
In stockObject 09 Sconce in Nylon and Sand
By Hot Wire Extensions
€935 - €1.145 -
In stockObject 12 Sconce in Nylon and Sand
By Hot Wire Extensions
€1.145 - €1.355 -
In stockObject 04 Sconce in Nylon and Sand
By Hot Wire Extensions
€1.208 -
In stockObject 07 Sconce in Nylon and Sand
By Hot Wire Extensions
€1.145 -
In stockObject 08 Sconce in Nylon and Sand
By Hot Wire Extensions
€1.670 -

Dyptich Wall Sconce in Brass and Recycled Plastic
By SIGNATURE OBJECTS
€1.800 -
In stock“Object 10” Wall Lamp from the “Native” Collection
By Hot Wire Extensions
€1.145 -
In stock“Object 05” Wall Lamp from the “Hotel” Collection
By Hot Wire Extensions
€1.208 -
In stock“Object 06” Wall Lamp from the “Hotel” Collection
By Hot Wire Extensions
€1.208 -
In stock“Object 08” Wall Lamp from the “Native” Collection
By Hot Wire Extensions
€1.995
Recycled material wall sconces take salvaged metal, reclaimed plastic, and spent sand and give them a second working life as light. Independent studios melt, grind, or print this reclaimed matter into bodies and shades that throw light across a wall rather than down onto a surface. The material carries the marks of what it used to be, so no two batches read quite the same way.
What defines recycled material wall sconces
Materials and techniques found here
Within this group, the material itself spans recycled aluminum and brass, reclaimed metal more broadly, recycled nylon and plastic, and sand recovered for casting. Sand casting is common, since foundry sand can be reused batch after batch until it is ground too fine to hold shape. Digital fabrication and 3D printing show up where recycled nylon or plastic is extruded or sintered layer by layer, letting a studio build a sconce body with no material cut away and wasted. Color tends toward the raw and the pigmented: charcoal and black where metal is left close to its cast state, sand and cream where the material keeps its own tone, aqua, dusty pink, or yellow where a studio has pigmented a plastic or resin batch. Bauhaus and minimalist shapes sit alongside more eclectic or futuristic forms, since the casting and printing processes used here are equally at home with a geometric block or an irregular, almost found-object silhouette. Some pieces are produced as open editions, repeatable as long as the material supply holds; others are limited editions, where a specific sand mold or print run will not be made again. For the fuller range of what reclaimed matter becomes beyond lighting, chairs, tables, and small objects made the same way sit under recycled material furniture and recycled material decor.
How to choose a recycled material wall sconce
Start with scale relative to the wall, not the room: a sconce reads against the plaster around it, so a body that looks modest on a shelf can dominate a narrow hallway wall. Mount height follows use rather than habit, lower for a reading spot beside a bed, higher and more even for a corridor where the light needs to wash the whole surface. Because the material's surface is part of the design, choose a finish you want seen at close range, a pitted cast edge, a visible print line, a matte pigmented plastic, since a sconce sits closer to eye level than almost any other light.
- Cast aluminum or brass bodies suit a wall that benefits from some weight and a cooler, metallic tone.
- 3D-printed nylon or recycled plastic suits lighter mounting situations and bolder, pigmented color.
- Sand-cast pieces, with their slightly uneven surface, read best where the wall itself is plain enough to let that texture show.
Where these sconces work
A recycled material sconce earns its place anywhere a wall needs light without giving up floor or tabletop space. In a bedroom, it flanks a headboard and frees the nightstand. In a hallway or entryway it marks the route from door to room, and in a living room it can sit beside a sofa doing the work a floor lamp would otherwise take on. The rawness of reclaimed metal or pigmented plastic tends to suit rooms that already mix materials rather than a space kept deliberately plain.
Caring for a recycled material sconce
Cast metal bodies made from recycled aluminum or brass want only a dry or barely damp cloth; moisture left sitting in a cast pit can start to dull or spot the surface over time. Printed nylon and recycled plastic shades are more forgiving of handling but should stay out of direct sun, which can fade pigmented color and make some plastics brittle over years. Wipe sand-cast surfaces gently, since their texture collects dust more readily than a smooth shade does. For the wider field this material moves through, from lighting down to tables, the full range sits under recycled material pieces on ADORNO, and every other way a wall can carry light is gathered under wall sconces as a whole.
How do I choose a recycled material wall sconce?
Look at what the material used to be and how it was shaped, cast aluminum or brass, sand-cast metal, or printed recycled plastic, since each gives a different surface and weight on the wall.
How do you care for a recycled material sconce?
Dust metal bodies with a dry cloth and keep them away from damp walls to avoid corrosion; wipe printed plastic or nylon with a barely damp cloth, since solvents can dull the surface.
Will the color or finish vary between pieces?
Yes, because the raw material carries marks from its past life, a pit, a seam, a grain, so no two batches of recycled metal or sand-cast pieces read quite the same.
What size or mounting height works best for a wall sconce?
Most hang at eye level, roughly five to five and a half feet from the floor, so light spreads across the wall rather than down onto a surface; the maker can confirm exact dimensions on the piece's page.
Which rooms suit recycled material wall sconces?
Hallways, entryways, bedrooms and living rooms all work well, since a sconce lifts light off the floor and tabletop and turns a blank wall into a focal point.
What happens if I need to return a recycled material sconce?
Returns are accepted within 14 days, except for made-to-order pieces; shipping is insured and worldwide, and every piece arrives with a certificate of authenticity.










