Bedroom side tables sit within arm's reach of the mattress, holding a lamp, a glass of water, a book, while staying low enough not to compete with the headboard. Studios working in this corner of the house favor oak and walnut for their warmth, stainless steel and aluminum for a harder, cooler line, and cast concrete where sheer mass is the point. Each material carries its own weight, literally and visually, into a room built for rest rather than display.

What defines a bedroom side table

Unlike a console or a coffee table, a bedside piece answers to the body lying down beside it. Its height usually sits close to mattress level, so a hand can find the lamp switch without looking. Its footprint stays small enough to leave a path to the door, and its surface takes the daily traffic of phones, glasses, and water rings without complaint.

Materials and techniques behind the range

Wood and cabinetmaking produce drawers and solid tops in oak and walnut, grain visible and finish often left satin rather than glossy, so the surface ages instead of looking worn. Metalwork turns stainless steel and aluminum into tables with thinner profiles and sharper shadows, sometimes welded as a single frame, sometimes bolted for a visible joinery. Concrete casting gives a bedside table real mass and a cool, matte surface, poured rather than carved, with a faint porosity that reads as stone from a distance.

Beyond material, the ways pieces are made and sold vary too:

  • Open editions, produced on an ongoing basis by a studio's regular process
  • Limited editions, numbered runs tied to a particular batch or material delivery
  • Unique pieces, each one carrying small variations from casting, turning, or hand finishing

Color tends to stay quiet in this room: beige, cream, ivory, gray, black, and the warm brown of unfinished wood dominate, with the occasional wine or deeper brown surfacing as an accent rather than a statement.

How to choose one for a bed

Start with height: a top that sits level with or slightly below the mattress keeps a lamp and a hand both within easy reach. Scale matters as much as height, since a table too wide crowds the walking space beside the bed, while one too narrow can't hold a lamp and a book at once. Finish should match how the room is used, a sealed or lacquered wood surface resists rings from glasses, while raw concrete or oiled wood will show the marks of daily use over time, which some people want and others don't.

Anyone building out a full bedroom furniture set benefits from choosing the side table after the bed frame, since proportion between the two pieces matters more than either looked at alone. Pairing a table with a reading lamp from the broader range of bedroom lighting is one of the simplest ways to make a bedside spot function as intended, rather than just hold objects.

Where these pieces sit well

Most bedside tables work in pairs, flanking a bed symmetrically, though a single table on one side with a floor lamp on the other reads just as resolved. In smaller bedrooms, a narrow metal or aluminum table can hold a lamp and little else without crowding a walking path, while a wider wood or concrete piece suits a room with more floor to spare. For a wider view of what else furnishes a bedroom, the full range of pieces made for this room, not only tables, sits under bedroom pieces on ADORNO.

Caring for wood, metal, and concrete surfaces

Oak and walnut want an occasional wipe with a dry or barely damp cloth, away from direct heat sources like a radiator, which can dry and crack the wood over years. Stainless steel and aluminum resist moisture well but show fingerprints, so a soft cloth keeps the surface even rather than streaked. Concrete, being porous, stains if liquid sits on it for long, so a coaster under a glass protects the surface better than any sealant reapplied later.

For comparison across other rooms and materials, the full set of side tables on ADORNO spans entryways and living rooms as well, while the wooden side tables and metal side tables groupings narrow the choice down by material alone, useful starting points before deciding what belongs beside a particular bed.

How do I choose a bedroom side table?

Start with height, the surface should sit close to mattress level so a lamp or glass stays within easy reach. Then consider material: wood and metal carry weight and age well, lighter materials suit a softer bedroom mood.

What is the best height for a bedroom side table?

Most bedside tables sit level with or slightly below the top of the mattress, close to standard table height. This keeps a lamp switch or alarm clock within easy reach from a lying position.

What materials are bedroom side tables made from, and how do I care for them?

Oak and walnut darken slightly with light and need only occasional waxing, while concrete and metal resist daily wear but can mark or scratch. Wipe wood with a dry cloth and keep concrete sealed against staining.

Can a bedroom side table work in other rooms too?

Yes, a compact side table built for bedside reach also suits a sofa end, a reading chair, or a narrow entryway wall. Proportion and height matter more than the room it was designed for.

Can I get a bedroom side table custom made?

Some studios take custom requests for size, finish, or material. Open the piece's page and use Chat with the maker to ask directly.

What are ADORNO's shipping and return policies for side tables?

Shipping is insured and worldwide, with a 14-day return policy on all but made-to-order pieces. Every piece ships with a certificate of authenticity, backed by a lowest-price guarantee.