N2-5 Pendant Lamp In Teak Wood
by Aaron Scott · Brooklyn, United States

182x17x17cm (72x7x7")Teak Wood

Carved as a single continuous teak body, N2-5 by Aaron Scott houses five dimmable LED lamps (2700K, 5.5W) using rotational symmetry to explore organic form and negative space. Suitable for covered outdoor settings, with hanging height customisable and teak care available on request from the studio.

Read more
10 others are viewing this
Certificate of authenticityAll pieces on ADORNO are authentic and studio-made. To verify that, a certificate, signed by the maker, is always included in the box.
€9.650
Shipping to your location
Import duties may applyWe declare all pieces as original duty-free works, however, your local customs office makes the final decision. Learn moreAll taxes includedWhat you see is what you pay. No hidden costs.
-
+
Open Edition
Ongoing series by the maker. Slight variations may apply.
Made for you
You will get pictures of the final piece before shipping
Delivered between29 Nov – 6 Dec
We arrange insured delivery from door to door.
Buyers protection
  • Certificate of Authenticity A signed certificate from the maker is always included in the box.

  • Lowest price guaranteed Find a lower price from the seller, we'll match it.

  • Secure online transactions All personal information that you send to us is encrypted and cannot be viewed by others.

  • 100% insured global deliveries We arrange worldwide delivery, and every shipment no matter the price is fully insured against damages.

  • 14 days return policy In the rare event, you receive a piece that you are not fully satisfied with, you can return it within 14 days of receipt for a full refund except return shipping costs. Made-to-order items are not eligible for return.

Shipping and delivery
Ships fromBrooklyn, United States
Delivery toyour location
Estimated delivery dateNovember 29 - December 6
Custom Crate200x20x20cm, 24kg
  • Tracked from studio to doorstepYou receive a tracking link as soon as the piece leaves the studio, and can follow it through every carrier hand-off until it reaches your door.
  • 100% insured, door to doorEvery shipment is fully insured from pickup to delivery. If anything happens in transit, you are covered for the full purchase price.
  • All made to order purchases are finalThis piece is produced specifically for you once you order, so it cannot be returned or exchanged.
  • Duties and taxes may applyWe declare all pieces as original duty-free works, however, your local customs office makes the final decision. Learn more
Specifications
Dimensions LxWxH
Piece Weight (kg)

10

Production Year

2026

Material

Technique

,

Design Class

Open Editions

FAQ
Are the light bulbs included and can they be dimmed?

Yes, the lamp comes with 5 dimmable LED bulbs (2700K, 5.5W, about 500lm each), but dimming requires a compatible dimmer, which is not included.

Is this lamp hardwired, and will it work with my country's voltage?

It is hardwired (no plug) and runs on 220-240V; adaptation for other voltages or plug systems is available upon request.

Can I use this lamp outdoors?

Yes, it is suitable for covered outdoor settings.

Can the hanging height or other details be customized?

Yes, hanging height can be customized, and the piece can be further customized upon request — use Chat with the maker to discuss specifics.

How long does it take to receive this piece?

This lamp is made to order and usually ships within 8 weeks.

How do I care for the teak wood?

Teak care and maintenance guidance is available directly from Aaron Scott Design on request.

Can I return this piece if I change my mind?

No, made-to-order pieces like this one are excluded from the standard 14-day return policy.

Will every N2-5 lamp look exactly the same?

No, this is an open edition and each piece may differ slightly since it is hand-sculpted.

What makes a light an outdoor light?

Not where you put it, but how it is built. Outdoor fixtures use sealed housings, gasketed joints, corrosion-resistant hardware and cable rated for exposure, and they carry a rating that states how much water and dust they can withstand. A fixture without that rating may work outside for a season and then fail — usually at the cable entry or the socket, where water collects.

What IP rating do I need?

It depends on exposure. For a covered porch, a loggia or a deep balcony where rain does not land directly, IP44 or above is generally appropriate. For an open terrace, a garden wall or anywhere fully exposed, look for IP65 or above. For in-ground fixtures and anything near a pool or pond, higher ratings up to submersion are required. When in doubt, specify one level higher than you think you need.

What is the difference between damp-rated and wet-rated?

They are the North American equivalents of the same idea. Damp-rated fixtures suit sheltered positions with humidity and occasional splashing — covered porches, soffits, bathrooms. Wet-rated fixtures withstand direct rain and can be used in fully exposed positions. If you are buying internationally, match the IP number rather than the label, since terminology differs by market.

Can I use an indoor lamp outside if the spot is sheltered?

Generally no, and we would rather say so than sell you something that fails. Indoor fixtures lack the seals, gaskets and cable protection that outdoor conditions require, and humidity alone will corrode contacts over time. A covered balcony in a mild climate is the most forgiving case, but it is still a risk with a handmade piece. Portable, battery-powered or candle-lit objects are the safe way to bring an indoor aesthetic outside.

Can I use outdoor lighting on a covered porch or in a pergola?

Yes, and this is where most decorative outdoor lighting belongs. A roof over the fixture takes most of the load off it, which widens what you can use. Two cautions: condensation still forms under cover, and wind-driven rain reaches further into a porch than people expect, so a piece on the outer edge needs a higher rating than one against the house wall.

Do you have solar outdoor lights?

Solar is common in mass-market garden lighting and rare in collectible design, since panels, batteries and the light quality they produce sit awkwardly with handmade objects. Where we can offer an off-grid solution it is usually a rechargeable or battery-powered piece rather than a solar one. Ask our curation team what is currently available if that is a requirement.

Do you have portable or rechargeable outdoor lamps?

This is the most practical route for balconies, terraces and rented properties, and the selection here grows as more studios make them. A rechargeable piece needs no wiring, no electrician and no permanent position, and can be brought indoors in bad weather — which also extends its life considerably. Check the stated run time and whether the piece is rated for occasional rain or only for dry evenings.

How is permanent outdoor lighting installed?

By a qualified electrician, using weatherproof connections, appropriate cable and residual current protection, with rules that differ by country. Many garden schemes use a 12V low-voltage system fed by a transformer, which is safer, easier to extend and does not require the same depth of buried cable as mains wiring. Plan positions before any paving or planting goes in — retrofitting cable is the expensive part.

How high should an outdoor wall light be beside a door?

Around 165–175 cm from the ground to the center of the fixture, which puts the light above eye level for most people approaching. Where a pair flanks a door, keep them symmetrical and scaled to the opening — a useful rule is a fixture roughly a quarter to a third the height of the door. Choose a design that directs light downward so nobody arrives with the source in their eyes.

How high should a pendant hang over an outdoor table?

75–90 cm between the tabletop and the lowest point of the fixture, as indoors. Outside, add two considerations: wind, which rules out anything that swings freely in an exposed position, and mounting, since a pergola beam or a loggia ceiling has to take the weight securely.

How bright should outdoor lighting be?

Much dimmer than indoors. Eyes adapt to darkness, so 100–300 lumens per fixture is usually enough to light a table or a seating area, and several low sources beat one bright one. Excess brightness flattens a garden, creates glare and destroys the contrast that makes planting and architecture look interesting after dark.

Which color temperature is best outside?

Warm — 2200–2700 K. Warm light flatters stone, timber, brick and planting, reads as welcoming rather than institutional, and attracts noticeably fewer insects than cool white light. Cooler temperatures belong in security and task lighting, which is a different product category and a different intent.

Which materials last best outdoors?

Brass, copper and bronze, which patina rather than corrode; marine-grade stainless steel and powder-coated aluminum, especially near the coast; dense hardwoods such as teak and iroko; and glass, concrete and glazed stoneware where frost is not a factor. Natural fiber, paper, textile and untreated softwood should be kept under cover or brought inside. Ask us about a specific piece — makers know their materials best.

Will outdoor pieces survive winter?

Rated fixtures will handle rain and cold; the risk is freezing. Water that gets into a ceramic body, a hairline glaze crack or an unsealed joint expands when it freezes and splits the material. In a climate with hard frosts, treat unsheltered ceramic, stone and glass pieces as seasonal, and store portable and candle-lit objects indoors over winter. Two seasons out and two seasons in will roughly double the life of most pieces.

Description

The N2-5 Pendant Lamp by Aaron Scott houses five dimmable LED lamps within a continuous, carved-out teak body. The lamp hangs from lamp wires attached to a canopy (teak or metal), which mounts to a standard junction box; hanging height can be customised.

The N-series uses rotational symmetry to explore the relationship between organic form and negative space. Each piece is fabricated through a stacked-lamination process, then sculpted by hand to its final shape, with careful engineering, the wood becomes almost a plastic medium, capable of intricate, eccentric forms without compromising strength or stability.

This lamp can be used in covered, outdoor settings. Contact Aaron Scott Design for information on teak care and maintenance.

Light source: 5 x dimmable LED, 2700K, 5.5W, approximately 500lm.

Dimensions LxWxH
Piece Weight (kg)

10

Production Year

2026

Material

Technique

,

Design Class

Open Editions

About Aaron Scott Visit Showroom →

Brooklyn-based designer Aaron Scott was raised in the mountains and forests of Southwest Oregon. He studied philosophy at the University of Colorado, Boulder, followed by fine art at the San Francisco Art Institute. Since moving to NYC in the late 90s Scott has worked in a variety of mediums – film, sculpture, writing and furniture design. Drawing inspiration from nature, science and mathematics, Scott’s work explores relationships of space, light and movement. Using a meticulous, labor-intensive process that relies on the hand and the eye, improvisation and experimentation, Scott has developed a body of sculptural furniture characterized by complex geometries, rotational symmetry and unconventional engineering. Since the early 2000s Scott’s furniture has been built using the stacked-laminate method – a technique that relies on the careful laying-out of alternating grain patterns on parallel pieces of wood, overlapped in successive layers. The process is both additive and subtractive. In the first stage the rough form is built by stacking glued-up layers, each corresponding to a given point on the x, y or z axes. These layers, laminated together in a stair-like or topographical form, are then sculpted with handheld power tools to obtain the final, smooth surface. With each new piece Scott attempts to push the boundaries of the medium of wood and his own imagination, posing and re-posing the question to himself: Which parts of the form are essential and which can be removed?
Question for the maker?
Aaron Scott
Photo Aaron Scott
· Brooklyn, United States
We are here to make sure you get the answers you need - in time.
Member since 2024 · Expect a reply within 24 hoursReply in 24 hours
More Ways To Browse
Pendant Lamps Outdoor Lights Ceiling Lamps Lamps Chandeliers Flush Mount Battery Operated Lights